Twin Star Home 26DE6439 Instrucción De Montaje página 6

4. Locate Hearth/Base (A) and set out fi nished side up
on the fl oor.
Insert one Wood Dowel (CC) into each of the
pre-drilled holes.
Attach the Completed assembly from step 3 to the
Hearth/Base (A). Make sure that dowels (CC) are
seated into the pre-drilled holes in the Hearth/Base.
Using Bolts (AA) and Washers (BB) attach panels
through pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
Hardware Used
AA
Bolt
BB Washer
CC AA Wood Dowel
5. Insert one Wood Dowel (CC) into each of the
pre-drilled holes on the top edges of the Assembly
from step 4. Then locate Mantel/Top (G) and lay
fi nished side up on top of completed assembly. From
the inside, attach Mantel/Top using Bolt (AA) and
Washer (BB) through the pre-drilled holes in the
mounting blocks.
HAND TIGHTEN ONLY.
Using Phillips head screwdriver tighten all Bolts
alternating top and bottom, left and right.
Hardware Used
AA Bolt
BB Washer
CC AA Wood Dowel
6. Locate Upper Back Panel (K) and Lower Back Panel
(L). Attach to the Back of completed assembly from
Step 5, Using a Phillips Head screw driver, tighten
Screws (DD) to through the pre-drilled holes in
Upper Back Panel and Lower Back Panel to the
completed assembly.
Hardware Used
Screw
DD
Fig. 4
x 6
x 6
x 8
Fig. 5
x 6
x 6
x 8
Fig. 6
x 32
5
A
G
CC
BB
AA
DD
AA
BB
CC
K
L