Troubleshooting Chart - Sears Craftsman 917.388012 Manual Del Usuario

TROUBLESHOOTING CHART
PROBLEM CAUSE CORRECTION
Starter rope hard 1. Engine flywheel brake ison 1. Depress control barto
topull when control barisreleased upper handle b efore
pulling s tarter rope.
2. Bent engine c rankshaft. 2. Contact a Sears orother
qualified service c enter.
3,
Blade adapter broken, 3. Replace blade adapter.
4. Blade dragging in grass. 4. Move lawn mower to cut
grass or to hard surface.
Grass catcher 1. Cutting height ton low. 1. Raise cutting height.
notf|lllng(Ifso 2. Lifton blade wom off. 2. Replace blade.
equipped) 3. Catcher not venting air. 3. Clean grass catcher.
Hard to push 1. Raise cutting height. 1. Grass is too high or wheel
height is ton low.
2. Rear of lawn mower
housing or cutting blade
dragging in grass.
3. Grass catcher too full.
4. Handle height position not
dght for you.
2. Raise rear of lawn mower
housing one (t) setting
higher.
3, Empty grass catcher.
4. Adjust handle height to suit.
17