Fuel Supply - Ferroli SUN M 50 Instrucciones De Uso, Instalación Y Mantenimiento

2.3 Fuel supply

Gas circuit
THE BURNER ONLY WORKS WITH FERROLI GAS TRAINS.
Make the gas circuit as shown in the diagram in fig. 3.
The line is to be prepared by the installer and, depending on the type of valve,
must ensure a supply pressure with burner operation as given in the technical data
table (see section 4.3).
1
Key
1 Burner
2 Min. gas pressure switch
3 Multibloc multivalve unit
4 Filter
5 Vibration-damping coupling
6 Manual shut-off cock
38
3
2
Cod. 35447686 - 04/2008 (Rev. 00)
SUN M50 - M70
MANUFACTURER
4
fig. 3
INSTALLER
5 6
GB