A. BEFORE FIRST USE
1. Remove the coffee maker from the package, and check the
accessories according to the list.
2. Clean all the detachable components according to the following
section of "CLEANING AND MAINTENANCE". Then assemble them
completely.
3. Ensure the steel mesh place in position. Place the carafe on
removable shelf.
4. Operate the appliance without coffee powder in steel mesh.
Repeat 2-3 times.
B. MAKE ESPRESSO COFFEE
1. Remove the tank cover by turning it in anti-clockwise. Pour
appropriate water in water tank with the carafe. Do not exceed the
maximum capacity.
Note: the carafe has the cup marks, the maximum tank capacity is
equal to 4 cups marks water quantity. The minimum tank capacity is
equal to 2 cups marks water quantity.
2. Before pouring the water into the water tank, be sure the power
cord is unplug from the power outlet and the steam knob is in the
O FF
R ELEASE
position.
Replace the tank cover in place by turning the cover in clockwise
until it locks in position.
3. Put the steel mesh into metal funnel, add coffee powder to steel
mesh with measuring spoon, a spoon coffee powder can make
about a cup of top-grade coffee. Then press the coffee powder
tightly with the tamper.
Note: Select your desired coffee powder to make desired cups
coffee, the steel mesh has 2 cups and 4 cups marks.
4. Make sure the tubers on the funnel align with the grooves in the
appliance, then insert the funnel into from the "INSERT" position, and
you can fix the funnel into coffee maker firmly through turn it anti-
clockwise until it is locked in the "LOCK" position (see Fig. 1).
5
EXP 25022 -080204