JVC Everio Guia Basica Del Usuario página 32

Trouble
Trouble
POWER/CHARGE
lamp starts blinking
when the monitor is
closed.
Recording cannot be
performed.
Recording stops
automatically.
Sound or video is
interrupted.
Desired files cannot be
found on the index
screen (thumbnail
display).
3D images cannot be
seen on a 3D
compatible TV properly.
The lamp does not flash
during battery pack
charging.
This unit heats up.
For more information, refer to the Detailed User Guide
32
http://manual.jvc.co.jp/index.html/
Action
The battery pack is being charged.
0
Check the A / B button.
0
Set to the recording mode by tapping the
0
q button on the screen.
Turn off this unit, wait for a while, and turn
0
it on again. (This unit stops automatically
to protect the circuit when the
temperature rises.)
Recording stops automatically after 12
0
hours of continuous recording.
Sometimes playback is interrupted at the
0
connecting section between two scenes.
This is not a malfunction.
Press the 3D button to switch to the
0
desired mode for playback.
Set "3D VIDEO REC FORMAT" in the
0
video recording menu to "MP4(MVC)" or
"AVCHD".
Tap I/J to select the desired media for
0
playback.
Set "HDMI OUTPUT" in the "COMMON"
0
menu accordingly.
Check the remaining battery power.
0
(When the battery pack is fully charged,
the lamp does not flash.)
When charging in either a hot or cold
0
environment, ensure that battery is being
charged within the permitted
temperature range. (Otherwise,
charging may stop to protect the battery
pack.)
This is not a malfunction. (This unit may
0
become warm when used for a long
time.)
Page
10
7
17
-
-
-
7
15
-
-
7
10
-