Door Storage - Amana Manual Del Proprietário

Fresh Food Features
Door Storage
Dairy Center _
The dairy center provides convenient storage .-Lib
for items such as butter, yogurt, cheese, etc.
This compartment is an adjustable feature
located in the door. It can be moved to
several different locations to _-,,._
accommodate storage needs.
To remove, slide dairy center
up and pull straight out.
To install, reverse above
procedure.
r
Kid Zone
TM
(some models)
The Kid Zone
TM
provides adjustable
storage for your child's preferred
snacks and beverages.
To remove, slide Kid Zone
TM
assembly up and pull straight out.
To install, reverse above procedure.
Tilt-Out Door Buckets
(some models)
The Tilt-Out Bucket assembly consists of a bucket and
frame, providing adjustable, convenient storage for
food items in door. The bucket assembly tilts forward
for easy access of items, and lifts out for ease in
cleaning and adjusting.
To remove and install bucket:
To remove bucket, tip bucket
forward and pull straight out
to remove.
To install bucket, slide bucket
into bucket frame and push
bucket upright.
To adjust bucket frame:
Remove bucket per above instructions.
Lift frame off door support and place in desired
door location.
Beverage ChillerTM/
Mini-Chiller
TM
(some models)
The Temperature-Controlled Beverage Chiller
TM
and
Temperature-Controlled Mini Beverage Chiller
TM
keep
beverages and other items up to 5°F(3°C) colder than
the rest of the fresh food section. Air inlet allows air
from the freezer section to pass to Beverage
ChillerTM"
I1®
The Beverage Chiller
TM
control is located
on the left wall of fresh food section.
Control adjusts amount of air circulating in
Beverage Chiller
TM.
Turn control toward the
large snowflake icon for colder temperature.
To remove and install Beverage ChillerTM:
If located directly above Chiller,
dairy center or door bucket may _1
need to be removed. Refer to I _ I II
appropriate instructions and I_1
remove item. Slide Beverage LLL_JL_ /
Chiller
TM
assembly up and pull_
straight out.
To install, align one of the
Beverage Chiller
TM
cold air
intake holes (A) with one of
the two air inlets (B) in door
liner. Push assembly down
onto door liner retainer until
it stops.
IMPORTANT. . Beverage ChitterTM wilt Rot operate
proPerly if air intake holes are not afigned with air
intet in door liner.
Door Buckets
Door buckets adjust to meet
individual storage needs.
To remove, slide bucket up and
pull straight out.
To install, reverse above procedure.
'Grip Pads
| The Grip Pads prevents
| objects from sliding in the door
bucket. Grip Pads are removabl
are top-rack dishwasher safe for
L easy cleaning.
i 0