Upgrading The Software - Samsung 750 Serie Manual De Usuario

Upgrading the Software

Samsung may offer upgrades for TV's irmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG
(726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by
connecting a USB drive to the USB port located on your TV.
Insert a USB drive containing the irmware upgrade into the WISELINK port
1.
on the side of the TV.
➣
Software can not be upgraded through the LAN connection.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
Press the ▲ or ▼ button to select "SW Upgrade", then press the ENTER
3.
button.
4. Press the ENTER
The message "Scanning for USB... It may take up to 30 seconds." is
displayed.
5. The message "Upgrade version XXXX to version XXXX? The system will be
reset after upgrade." is displayed.
Press the ◄ or ► to select the "OK", then press the ENTER
Please be careful to not disconnect the power or remove the USB drive while
upgrades are being applied. The TV will turn off and turn on automatically
after completing the irmware upgrade. Please check the irmware version
after the upgrades are complete. When software is upgraded, video and
audio settings you have made will return to their default (factory) settings. We
recommend you write down your settings so that you can easily reset them
after the upgrade.
button.
button.
button.
English - 6
TV Side Panel
USB Drive
Energy Saving : Off
PIP
SW Upgrade
Software Upgrade
Scanning for USB.....
It may take up to 30 seconds.
Software Upgrade
Upgrade version XXXX to version XXXX? The system will
be reset after upgrade.
OK Cancel
►