Setting the Light Effect
You can turn the LED on the front of TV on/off.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Light Effect", then press the ENTER
button.
. Press the ▲ or ▼ button to selec t "Off", "In Standby", "In Watching TV" or
"Always", then press the ENTER button.
• Off: LED will not come on.
• In Standby: Turns the LED on in standby mode.
• In Watching TV: Turns the LED on while watching TV.
• Always: LED will come on after you turn the TV off.
Press the EXIT button to exit.
Set the Light Effect to Off to reduce power consumption.
Upgrading the Software
Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG
(726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a
USB drive to the USB port located on located on the side of your TV.
1. Insert a USB drive containing the firmware upgrade into the WISELINK port on
the side of the TV.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
3. Press the ▲ or ▼ button to select Software upgrade, then press the ENTER button.
4. Press the ENTER button.
The message Scanning for USB... It may take up to 30 seconds. is displayed.
Please be careful to not disconnect the power or remove the USB drive while
upgrades are being applied. The TV will shut off and turn on automatically after
completing the firmware upgrade. Please check the firmware version after the
upgrades are complete.
When software is upgraded, video and audio settings you have made will return to
their default (factory) settings. We recommend you write down your settings so that
you can easily reset them after the upgrade.
English - 64
TV
Setup
▲More
Blue Screen
: Off
Melody
: Medium
PC
Home Theater PC
: Off
: In Watching TV ►
Light Effect
Energy Saving
: Off
▼ More
Move
Enter
TV
Setup
▲More
Blue Screen
: Off
Melody
: Medium
Off
PC
In Standby
Home Theater PC
: Off
In Watching TV
Light Effect
:
Watching Mode On
Always
Energy Saving
: Off
▼ More
Move
Enter
LED
TV Side Panel
USB Drive
TV
Setup
▲ More
HDMI Black Level
: Low
Film Mode
: Off
Wall-Mount Adjustment
PIP
Function Help
: On
SW Upgrade
Move
Enter
SW Upgrade
Scanning for USB...
It may take up to 0 seconds.
►
►
►
►
►
Return
Return
►
►
►
►
►
►
Return