Mounting; Orientation; Floor Mounting - Chauvet Professional NEXT NXT-1 Manual De Usuario

Setup

Mounting

Orientation

Mounting Diagram
-6-
Before mounting this product, read and follow the Safety Notes. For our CHAUVET
Professional line of mounting clamps, go to http://trusst.com/products/.
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance. The NEXT NXT-1 can be suspended upright or
upside down using the 2 Omega brackets included, or it can be placed on its rubber feet on a
flat level surface.
Chauvet recommends using the following general guidelines when mounting this product:
• When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
• The product is not intended for permanent installation.
• Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
• Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can support the product's
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
• When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET Professional line of safety cables, go to http://trusst.com/products/.
• When mounting the product on the floor, make sure that the product and cables are away
from people and vehicles.
• Place the NEXT NXT-1 so that it can move freely without hitting anything or anybody.
• Leave enough slack on the cabled to prevent tension and pull on the plugs.
Mounting Clamps
Safety
Cable
Overhead Mounting
Omega Brackets
Rubber Feet (x4)

Floor Mounting

NEXT NXT-1 User Manual Rev. 6