Twin-Star International 23MM9501 Instrucción De Montaje página 5

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors and utility knife
ASSEMBLY INSTRUCTIONS
1. Locate the Front Frame (D), Back Frame (E), Middle
Panel (B), Right Panel(C), and set out face down on
a scratch-free surface. Connect the Front Frame (D),
Back Frame (E), Middle Panel (B), Right Panel(C)
with Screw (CC) and tighten through the pre-drilled
holes.
Hardware Used
Bolt
CC
1/4 in. x 7/8 in.
Allen Key
RR
2. Locate the Top Panel (I) and lay fi nished side up on
top of Completed Assembly from step1. From the
inside, attach the Top Panel using Bolts (EE) and
Washers (HH) through the pre-drilled holes in the
frame.
Hardware Used
Bolt
EE
3/16 in. x 3/8 in.
Washer 12mm
HH
Fig. 1
B
x 8
x 1
Fig. 2
x 10
x 10
4
E
CC
C
D
HH
EE
I