Functions; Mode Key - Testboy TV 325 Instrucciones De Empleo

Functions

Functions

MODE key

By pressing the mode key, you can switch between the various measure-
ment functions:
"MIN"
"MAX"
"DIF"
"AVG"
After the Testboy
values can be shown again by pressing the MODE key. With each new
measurement, the value of the old measurement is overwritten and replaced
with the new one. You can also use the MODE key to set the alarm values
for "high alarm" (HAL), "low alarm" (LAL) and emissivity (E). The Testboy
TV 325 changes the function with each press of the MODE key.
Use the MODE key to set the alarm values and emissivity as needed. Use
the two arrow keys to set the required value.
36
Displays the lowest temperature value found during the meas-
urement
Displays the highest temperature value found during the
measurement
Shows the difference between the highest and the lowest
temperature value
Shows the average value
®
TV 325 has been turned off; the measured temperature
®
®
Testboy TV 325