Connecting Power To The Tv - HP MediaSmart SL4782N Guía Del Usario

The TV internal wireless antennas do not
function as a TV antenna for air-broadcast
television signal reception.
You can connect your TV by using both a
wired and a wireless LAN connection to
your PC router, but only one network
connection is supported at a time.
To switch the supported connection, select
the network type by using the Media
button, selecting the Settings menu, and
then selecting Network; see "Changing
network settings" on page 92.
Connecting the Ethernet cable
Use these steps to connect the Ethernet cable for a
wired connection to your home network:
CAUTION: Before connecting to your
network, unplug power for the TV and all
connected components.
1
Connect the Ethernet cable to your network router
and to the Ethernet LAN connector on the rear of
the TV. The LAN connector is beneath the edge of
the TV LAN label.
22
HP MediaSmart HDTV User Guide
n
!
c
2
Connect power to the TV; see "Connecting power
to the TV" on page 22.
3
Turn on the TV; see "Turning the TV On and Off"
on page 25.

Connecting power to the TV

1
Connect the AC power cord to the connector on
the rear of the TV.
2
Connect the AC power cord into the AC power
outlet.