Using The Audio Menu; Adjusting The Audio - HP MediaSmart SL4782N Guía Del Usario

Contrast set correctly.
Saturation: Sets the image intensity by
adjusting the appearance of skin tones.
When Saturation is set too high, skin tone
looks reddish or sun-burnt. When Saturation is
set too low, skin tone looks too pale. Adjust
Saturation for natural skin tones.
Hue: Sets image tones; decrease the value to
make tones more red, or increase it to make
more blue tones. Normally, no adjustment is
needed.
Sharpness: Sets the image sharpness.
Color Temperature sets different color
temperature settings: Cool, Standard,
and Warm.
Aspect Ratio sets the default dimensions of the
TV picture image. For more information, see
"Changing the View by Using the Aspect Button"
on page 42.
PC provides options to adjust the image from the
PC Input connector; see "Adjusting the PC screen
image" on page 70.
Adjusting the PC screen image
The PC menu is not available if a PC is not connected
to the PC Input connector. The following options adjust
the image from the PC Input connector:
H Size adjusts the horizontal size of the image.
H Position adjusts the horizontal position of the
image.
V Size adjusts the vertical size of the image.
V Position adjusts the vertical position of the
image.
Phase Adjust adjusts the phase of the clock
used to synchronize the image.
Clock Adjust adjusts the clock used to
synchronize the image.
70
HP MediaSmart HDTV User Guide
Auto Sync button starts automatic
synchronization of the image.
Default button resets all PC menu options to the
default values.

Using the Audio Menu

The Audio menu sets the sound levels, the mode for the
digital audio output signal, and sound items.
Audio menu Options
Mode Voice/Standard/Music/User
User mode options:
Balance (Left-to-right sound
adjustment)
Auto Volume On/Off
SAP/MTS
Digital Audio Dolby Digital/PCM
Virtual Surround Off/Theater/Music Hall
Speaker On/Off

Adjusting the audio

Mode sets the audio adjustments to preset values
of Voice, Standard, Music, or User. User
mode enables individual adjustment of the treble
and bass values.
Balance sets the distribution of sound between
the speakers.
Auto Volume turns automatic volume adjustment
on or off.
SAP/MTS selects the default mode and language
for secondary audio programs; see "Setting the
SAP/MTS Stereo Mode" on page 43.
Digital Audio sets the mode for the signal
provided on the digital audio output connector;
see "Choosing the digital audio output mode" on
page 71.
Treble
Bass
Mono/Stereo/SAP
English/French/Spanish