Using Your Remote; Code Identifi Cation - GE RM24911 Manual De Instrucciones Técnicas

Using Your Remote

Code Identifi cation
The Code Identifi cation Feature allows you to
identify the three digit library code stored under
your device button. For example, if you want to fi nd
out what three digit code is stored under your TV
device button, follow the six steps below:
1. Press and hold the SETUP button until
the red indicator stays on. Release the
SETUP button.
2. Press and release the desired
device button (TV, VCR, etc.). The
red indicator blinks, then stays lit.
3. Press and release the SETUP button.
The red indicator blinks once and
remains lit.
4. To fi nd the fi rst digit
for the code stored
under the device
button pressed in step
2, press each numeric
button from 0-9 in
turn. The number that
causes the indicator
light to blink is the fi rst
digit in your code.
5. To fi nd the second digit, repeat step 4.
6. Repeat step 4 again to fi nd the third digit. This
time the red indicator turns off and stays off.
8