Clatronic AR 687 CD/MP3 Instrucciones De Servicio página 107

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65
Connect the device as shown in the diagram.
Constant current
Loudspeaker,
Note:
Do not attach the removable control panel until after connection of the cables.
Please use loudspeakers with an impedance of 4 ohm.
Important Information for installing your carradio!
1. The screws (h) of the transport locking device should be removed before
installation, as otherwise the CD cannot be inserted.
2. The device is designed for the minus pole of the battery, which must be con-
nected to the body of the vehicle. Please check this before installation.
3. When installing/connecting your device please note that not every vehicle is
equipped with an "ISO connection". In this case we recommend the use of an
ISO adapter specifi cally designed for your vehicle.
05-AR 687 New.indd 107
05-AR 687 New.indd 107
Antenna connection
Yellow
Fuse/fi lter
connection
Black
box
Earth
0,5A & 10 A
Red
Ignition
fuses
Automatic antenna (Blue)
White
front left
White/black
Green
rear left
Green/black
First place the operating panel
in position on the right-hand side
and then lock it into place on
the left.
Connection
AUX IN (optionally)
Subwoofer output (optionally)
RCA output
Grey
Grey/black
Violet
Violet/black
Red R
Brown
White L
Yellow
Grey
Red R
White L
Loudspeaker,
front right
rear right
26.06.2008 13:03:49 Uhr
26.06.2008 13:03:49 Uhr
GB
107

Publicidad

Tabla de contenido
loading

Tabla de contenido