Using the IR Learning Function
IMPORTANT: Hold both remotes about 12" (30cm) directly in
front of the MagniFi MAX when pressing their respective buttons and make sure your
remotes have fresh batteries.
Entering IR Learn Mode
Make sure your sound bar is powered on, then press and hold the
about 3 seconds. When you hear a two-note tone release the button. You should now see white lights on
the front of the sound bar bouncing left and right.
STEP 1: Select a button on your MagniFi Max remote
Press and release the button on the MagniFi MAX remote that you want to learn (ex: Volume Up). You will
hear a single tone and see all white lights fading in and out together.
STEP 2: Select a button on your TV remote
Briefly tap the corresponding button on your TV remote. You will hear a two-note tone and see white
lights counting down from left to right as the received IR command is processed.
STEP 3: Verify the results
• If you see the white lights fading in and out again, repeat step 2.
• If you hear a two-note tone and see
Please try again.
• If you hear a single tone and see
16
•
•••••••••
the command was not learned.
•
•••••••••
the command was successfully learned.
Source button on the sound bar for
12" (30cm)