Remote Control; Timer Programming - Tectro TP 20 Instrucciones De Uso

REMOTE CONTROL

a.
b.
c.
d.
e.
f.
g.
The remote control works in combination with the control panel. Aim the fro n t
end of the remote control at the red window. The maximum operating distance
f rom the air conditioner is approximately 5 metres. Place AAA Batteries before
use.

TIMER PROGRAMMING

DEHUMIDIFACATION OPERATION
P ress the
select the dehumidifier mode. When the dehumidifier mode is on, the tempera-
t u re buttons and the fan speed buttons do not function and the fan will operate
on medium speed.
The dehumidifier indicator light will illuminate and stay solid while the unit is
dehumidifying. When the humidity in the room is 50% or lower, the compre s s o r
will not run, the unit will not dehumidify, and the dehumidifier light will blink.
Remember, the exhaust hose does not need to be used in dehumidifier mode.
4
58
LCD Screen (TP 25)
Power on/off button
Timer and thermostat setting buttons
Mode button (select A/C, Fan or Dehumidifier)
A/C Fan Speed button (High, Medium, Low)
Timer ON / OFF button
Celsius / Fahrenheit selector (TP 25)
P ress the button on the remote or the "Timer Setting" button on the
control panel to turn on the Timer Function.
P ress the or buttons on the remote or the
control panel to set the desired shut-off period.
The unit will shut off when the set time elapses.
button on the remote or the MODE button on the control panel to
or buttons on the