Cloud Installation; Ethernet Gateway Quick Start Overview; Create And Setup Your Synapsense900 Account In The Cloud - Panduit SynapSense 900 Serie Guia De Inicio Rapido

Empresas y en la nube
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Panduit SynapSense® 900 Series
Quick Start Guide – Enterprise and Cloud Start
Guía de inicio rápido – Empresas y en la Nube

Cloud Installation

Ethernet Gateway Quick Start Overview

1. Create and setup your SynapSense900 account
2. Connect and power on the gateway.
Important: When setting up your sensing network,
please make sure your sensors are at least 3-5 feet
away from the gateway, and the sensors are at
least 1 foot apart from each other.
Create and Setup Your SynapSense900 Account in
the Cloud
3. Visit
http://www.synapsense900.com
SynapSense900 online sensor monitoring account
4. Follow the on-screen instructions to enter your
account and contact information.
5. Contact Panduit Technical Assistance if you do not
have a subscription code:
6. Once you have your subscription key, enter it on
your account overview page in the field shown
below:
WARNING: DO NOT insert batteries into the
wireless sensors after they have been configured.
7. You will be prompted to create your first sensor
network. Simply enter a name for your network.
8. Next, you will be prompted to add a wireless
gateway and wireless sensors to your network.
Enter the information from your gateway then click
9.
the "Assign Gateway" button.
©Copy Right Panduit Corp., January 2018 All Rights Reserved
00090FMD/04
10. Enter the information from your first wireless
sensor then click the "Assign Sensor" button.
Do not insert batteries during this step.
11. On the next screen, enter a name for the wireless
sensor and use the drop down to tell us how you
to create an
are going to be using the wireless sensor (this
allows us to suggest settings for your sensor).
When finished, click the "Continue" button.
12. Repeat these steps to add any additional wireless
sensors to your network. Hit "Done" when
complete
13. Proceed to page 5 to complete installation.
Page | 4

Publicidad

Tabla de contenido
loading

Tabla de contenido