Chillafish bunzi Manual Del Usuario página 4

Switching between 3-wheel and 2-wheel mode
There are no tools needed for switching between the 2-wheel and the 3-wheel
mode. Follow these steps to switch between 2- and 3-wheel mode:
1. Unscrew the seat fixer at the bottom of the
seat and lift the seat
from the frame
2. Turn both legs of the frame 180° to the
other side. You will notice that the frame
legs hinge around the handlebar.
3. Connect the seat again securing both frame legs at the other side of the
handlebar. You will notice that the bottom side of the frame leg has fitter
holes to correctly fit the seat.
3 WHEELS
ATTENTION: NOTE THAT IN 3-WHEEL POSITION ONLY THE LOWEST SEAT
POSITION IS AVAILABLE AND IN 2-WHEEL POSITION ONLY THE HIGHEST
SEAT POSITION IS AVAILABLE. DO NOT ATTEMPT TO FIT THE SEAT AT THE
HIGH POSITION IN 3-WHEEL MODE OR AT THE LOW POSITION IN 2-WHEEL
MODE. ALWAYS MAKE SURE THE FITTER STUBS FIT IN THE FITTER HOLES IN
THE BOTTOM OF THE FRAME TO ENSURE A GOOD SEAT FIXATION.
4
EN
2 WHEELS