Technical Data; Gas Heated Griddle Plate Omnia Series, Ctg. Ii (Natural Gas And L; Technical Characteristics; Installation Instructions - Diamond OMNIA Serie Manual De Instrucciones

1.
1.1 GAS HEATED GRIDDLE PLATE OMNIA SERIES, CTG. II (NATURAL GAS AND L.P.G.)
SIZE
in
mm
GAS CONNECTION
TOTAL THERMAL CAPACITY (Hi)
GAS CONSUMPTION
(15°C)
NET WEIGHT
L = Smooth Plate LR = Plate 50% L + 50% R
R = Scuffed Plate C = Chrome Plate
1.2

TECHNICAL CHARACTERISTICS

Stainless steel frame AISI 304, mounted on height-adjustable feet and with a rubber support top.
- COOKING PLATE in special steel with high thermal conductivity, in the smooth or scuffed versions, with a 18/10 stainless
steel anti-spatter screen; C version with a chrome worktop.
- GREASE WELL DRAWER made of stainless steel AISI 304.
- GAS HEATING by means of self-adjusting flame burners made of stainless steel AISI 304, guaranteeing a high heating
uniformity to the plate. Thermostat regulation of temperature by safety valve and thermocouple for the interruption of gas
flow in case of accidental extinguishment of the pilot burner. Piezoelectric ignition of pilot.
- INDEPENDENT CONTROLS for each plate zone for varying temperatures in Models G77/P7T and G77/P11T.
2.
Installation and any transformation for using other types of gas, must be performed by qualified technicians according
to the law in force.
See technical data tables: 1.1.
WARNINGS:
Should the unit be installed against a wall, the latter must be heat resistant to temperatures of 80°C and must be fireproof.
Before proceeding with the installation, remove the protective plastic film from the relevant parts, eliminating any adhesive
residues with an appropriate cleaning product suitable for stainless steel.
Install the unit in a horizontal position; its correct levelling will be achieved by rotating the adjustable feet.
If the unit is installed by itself, it is advisable to fasten it to make its stability safer.
GB
MODEL
exhaust type
external LxPxA*
plate
L.P.G. G30/G31
NATURAL GAS H- G20
NATURAL GAS L- G25
G77/PL4T
G77/PLCD4T
G77/PR4T
G77/PRC4T
A
400 x 700 x 270
LxP 350 x 500
G1/2"
kW 5,5
g/h 433 - 427
m /h 0,582
3
m /h 0,677
3
kg 36
*TOTAL HEIGHT = 425 mm.

INSTALLATION INSTRUCTIONS

- 12 -

TECHNICAL DATA

G77/PM11T
G77/PL7T
G77/PMCD11T
G77/PLCD7T
G77/PR11T
G77/PM7T
G77/PR7T
G77/PRC11T
G77/PRC7T G77/PMC7T
A
700 x 700 x 270 1100 x 700 x 270
650 x 500
G1/2"
11
866 - 854 1300 - 1281
1,164
1,354
70
A
1050 x 500
G1/2"
16,5
1,746
2,031
104