Technical Data; Technical Characteristics; Oven; Gas Heating - Diamond G77/6BFA11-N Manual Del Usuario

1.
1.1

TECHNICAL CHARACTERISTICS

STRUCTURE Stainless steel frame AISI 304, stainless steel panels and base mounted on height-adjustable feet.
TOP in stainless steel AISI 304 seal tight.
GRILLS in porcelained cast iron, high-temperature resistant.
BURNERS in chromate cast iron, flame-spreader made of brass with stabilised fire, ignition by pilot flame, fixed nozzles for
various types of gas.
GAS COCKS in pressed brass, supplied with safety valve and thermocouple for automatic interruption of gas flow in case of
accidental pilot extinguishment.
CONTROL KNOBS in heat-insulated material.
1.2

OVEN

COOKING CHAMBER in high-temperature and acid resistant porcelained steel, with internal dimensions complying to
GASTRONORM 2/1.Thermal insulation with high-density glass wool. Grill's lateral supports made of chromate steel bars,
easily extractable for cleaning. Grill made of chromate steel bar.
OVEN DOORS with double panelling and insulating glass wool interspace, door headers of enamel steel, handles mounted
on athermal supports, and door seal. Balanced spring hinges.
1.3

GAS HEATING

Stainless steel burner with self-stabilising flame. Thermostat adjustable temperature 150÷300°C with safety valve and
thermocouple for automatic gas interruption in case of accidental pilot extinguishment.
Piezoelectric ignition of the oven's "Targhet" pilot.
1.4

ELECTRICAL HEATING

Electrical resistors reinforced in stainless steel are located in the cooking chamber.
Selector switch with 50÷300°C thermostat and the following functions:
- Oven ignition
- Full oven heating 4400W
- Lower resistor 3200W
- Upper resistor 1200W
- Grill element 2750W
Signal lamps indicating whether the oven/grill is on and the thermostat needs heating increase.
1.5

GAS SOLID TOP

COOKING PLATE made of non-deformable special steel with extractable central "fast-cooking-zone" disc.
BURNER made of AISI 304 stainless steel with stabilised flame; ignition by "Targhet" pilot flame, with fixed nozzles for
various types of gas.
PIEZOELECTRIC IGNITION of the pilot burner.
GAS COCK of pressed brass, supplied with safety valve and thermocouple for automatic gas interruption in case of accidental
pilot extinguishment. Adjustment between minimum and maximum capacity.
COMBUSTION CHAMBER made of AISI 304 stainless steel insulated by way of ceramic fibres (Aluminium Oxide and
Silicon Monoxide).
WINDSCREEN/DRAFT HOOD may be supplied as an optional; (Type B 11 ).
GB
- 16 -

TECHNICAL DATA