Sharpening Stage - Vogue GD232 Manual De Instrucciones

Telephone Helpline: 0845 146 2887 (United Kingdom)

Sharpening Stage 1

Use for blades with a very blunt edge.
1. Connect the sharpener to a mains power supply.
2. Turn the power switch to 'I'.
3. Hold the handle of the knife firmly and place the blade hilt in the left
sharpening slot of Stage 1.
4. Apply enough pressure for the knife to make contact with the sharpening
wheel.
5. Pull the blade back to the tip in a smooth motion. Do not twist or rock the
blade.
6. Repeat this process for the right sharpening slot of Stage 1.
Note: As a guide, each pull for a 6 inch blade should take 2-3 seconds. An 8 inch
blade should take 4 seconds and longer blades 6+ seconds
Sharpening Stage 2
Use for honing a blade or to achieve a razor sharp edge after stage 1.
1. Repeat steps 3-6, using Sharpening Stage 2.
Note: 1-2 pulls on each side of stage 2 is normally sufficient, though more pulls will
achieve a finer edge
Telephone Helpline: 0845 146 2887 (United Kingdom)