AKASO V50 Pro SE Manual De Instrucciones página 9

Ocultar thumbs Ver también para V50 Pro SE:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
GENERAL SETTING
1. Control: Mic/Speaker/Brightness
You can adjust the mic, speaker and brightness of your V50 Pro SE.
2. Sounds: Shutter: ON/OFF
Boot-up: ON/OFF
Beep: ON/OFF
Default setting is on.
You can turn on or off the shutter, boot-up, beep sounds.
3. Distortion Calibration: ON/OFF
Default setting is off.
Turn on Distortion Calibration, it can correct the image distortion.
Note: You cannot select Distortion Calibration when Image Stabilization is on.
4. Angle: Super Wide/Wide/Medium/Narrow
Default setting is Super Wide.
The angle refers to how much of the scene (measured in degrees) can be captured
through the camera lens. Super Wide angle captures the largest amount of the
scene, while Narrow angle captures the least.
5. Wi-Fi: ON/OFF
Default setting is off.
6. RF: ON/OFF (Remote)
Default setting is off.
7. Diving Mode: ON/OFF
Default setting is off.
Turn on Diving Mode, it can compensate for the lack of red light in underwater
scenes. Diving Mode is designed to be used in tropical and blue water, optimized for
use between 10 and 80 feet.
8. Date & Time: MM/DD/YY HH/MM/AM or PM
Default setting is MM/DD/YY HH/MM/AM or PM.
12
9. Screen Saver: OFF/1Min/3Min/5Min
Default setting is 1Min.
Turns off the display after a period of inactivity to save battery life. To turn on the
display again, press any button on the camera.
10. Auto Power Off: OFF/1Min/3Min/5Min
Default setting is 3Min.
Powers off your V50 Pro SE after a period of inactivity to save battery life.
11. Quick Record: ON/OFF
Default setting is off.
If you turn on Quick Record, the camera records video automatically after you turn
on V50 Pro SE.
If you turn on Quick Record and use it as a dash cam, the camera will turn on
automatically if you start your car and will turn off if you stop your car.
12. USB: Storage/PC Camera
If you connect this camera to computer, please select "Storage".
If you want to use this camera as a PC camera, please select "PC Camera".
13. Reset Wi-Fi Setting: Yes/No
Default setting is Yes.
This option can erase the Wi-Fi data of V50 Pro SE.
14. Language: English/Deutsch/Français/Italiano/Español/日本語/简体中文/繁体中文
Default setting is English.
15. Format Card: Yes/No
To keep your microSD card in good condition, reformat it on a regular basis.
Reformatting erases all of your content, so be sure to offload your photos and videos
first. To reformat your card, please enter General Setting, then scroll through th
options to locate and tap "Format Card", then tap "Yes".
13

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido