Linksys RE6500 Guia Del Usuario página 21

Tabla de contenido

Publicidad

Choose from the methods below to connect devices that support Wi-Fi Protected
Setup to your network.
NOTE Repeat the instructions for each client device that supports Wi-Fi Protected
Setup.
Connecting with the Wi-Fi Protected Setup Button
Use this method if your client device has a Wi-Fi Protected Setup button.
1. Press the Wi-Fi Protected Setup button on the client device.
2. Click the Wi-Fi Protected Setup button on the extender's Wi-Fi Protected Setup
screen, OR press and hold the Wi-Fi Protected Setup button on the top panel of the
extender for one second. When the connection is complete, the Wi-Fi Protected
Setup light on the extender will be solid.
3. If using the extender's Wi-Fi Protected Setup screen, be sure to click OK within
two minutes or you will have to start over.
Connecting with the client device's PIN
Use this method if your client device has a Wi-Fi Protected Setup PIN (Personal
Identification Number).

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido