dirna Bergstrom Bycool SPLIT OFF ROAD Instrucciones De Montaje página 18

SPLIT
EN
9
Mount the cover with the previously removed
screws.
10
Make boreholes in the cabin, if necessary, for
the piping and wastewater pipe output.
11 Position the bushing and take out the piping and
cabling.
12
Cut the wastewater pipe and connect the
two T-joints in the evaporator, then run the
two pipes to the outside through the most
appropriate place, ensuring there are no loops
or constrictions. Position drainage valves in the
pipes.
13
Connect blower
extensions and run through to the control plate
assembly location for connection.
and anti-freeze sensor
9
11
18
Air conditioning for vehicles
towards the
outside
drainage valve