SPLIT
EN
5
Secure the control plate by making (4) Ø3
boreholes in the most appropriate place.
Secure with (4) 4.2 x 16 tapping screws.
5
CAUTION
The controls unit is fitted with a switch which should
be used as follows:
1
When the unit is only to be used with the engine
running, press the switch towards the other
vehicles.
2
When the unit is to be used with the engine
either running or shut down, press the switch
towards trucks only. In this case, the capacity of
the battery will determine how long the unit can
run with the engine off.
5
1
2
20
Air conditioning for vehicles
5