Using The On-Screen Menus; Adjusting Picture Settings - Insignia NS-LCD19W-09 Guia Del Usuario

Insignia NS-LCD19W-09 19" LCD TV
2 Press CH+ or CH- to select to a blank record,
then press ENTER to add the current
channel to your favorites list.
To remove channels from your favorites list:
1 Go to the channel you want to remove, then
press FAVORITE to open your favorites list.
2 Press CH+ or CH- to select to the record of
current channel, then press ENTER to
remove it from your favorites list.

Using the on-screen menus

Use your remote control to navigate in the
on-screen menus. The on-screen menus shown
in this guide may be different from those on your
TV. These are examples to illustrate your TV's
operation.
To use the on-screen menus:
1 Press INPUT on the remote control to select
the video source.
2 Press MENU on the remote control. The
on-screen menu appears.
3 Press CH+ or CH- to highlight the Video,
Audio, Channel, Function, or Lock icon,
then press ENTER to enter the menu.
4 Press CH+ or CH- highlight a setting, then
press ENTER to confirm.
5 Press VOL+ or VOL- to adjust the setting.
6 Press EXIT to close the menu and return to
normal viewing.

Adjusting picture settings

Adjusting TV picture settings
To adjust TV picture settings:
1 Press MENU on the remote control. The
on-screen menu appears.
2 Press CH+ or CH- to highlight the Video
icon, then press ENTER to enter the Video
menu.
3 Press CH+ or CH- to highlight an option, then
press ENTER to confirm. Choices include:
• Mode—Select a preset picture mode
which best corresponds to your viewing
requirements. Choices include Mild,
Standard, Vivid, and Custom.
Note
The Brightness, Contrast, Sharpness, Color
Temperature, and Tint can only be adjusted if
Custom mode is selected.
• Brightness—Set the brightness level of
the picture.
• Contrast—Set the contrast balance of the
picture.
4 Press VOL+ or VOL- to adjust the setting.
5 Repeat Steps 3 and 4 to adjust the other
6 Press EXIT to close the menu and return to
Adjusting PC picture settings
When you are using a PC with your TV, a special
PC option becomes available. This lets you
optimize your TV's picture settings for use with
the PC.
To adjust PC picture settings:
1 Press MENU on the remote control. The
2 Press CH+ or CH- to highlight the Video
www.insignia-products.com
• Color—Set the color saturation of the
picture.
• Tint—Set the color tone of the picture.
• Sharpness—Set the amount of detail
enhancement of the picture.
• Color Temperature—Select Warm
(increased red tones), Custom (to make
your own settings), Cool (increased blue
tones), or Standard for a balance.
• Advanced Video—Select to change
advanced picture settings, which include:
• DNR–Digital Noise Reduction. Adjust
to reduce the appearance of digitizing
error caused by compression: Off,
Auto, Weak, Medium, or Strong.
• Black Level Extender–Adjust to
increase the level of detail in black
areas of the picture: On or Off.
• White Peak Limiter–Adjust to increase
the level of detail in white areas of the
picture: On or Off.
• CTI–Color Transient Intensity. Adjust
the picture to eliminate color errors:
Medium, Strong, Off, and Weak.
• Flesh Tone–Adjust the flesh colors: On
and Off.
• Adaptive Luma Control–Adjust the
luminance of the picture: On and Off.
settings.
normal viewing.
on-screen menu appears.
icon, then press ENTER to enter the Video
menu.
13