Setting Up The Clock Manually; Viewing Closed Captions; Using The Sleep Timer - Insignia NS-LCD22 Guia Del Usuario

NS-LCD22.fm Page 14 Monday, February 19, 2007 1:39 PM
6 Press EXIT to return to watching the
television.

Setting up the clock manually

If you set up the clock automatically and the
wrong time is set, you can set the clock
manually.
To set up the clock manually:
1 Press MENU.
2 Press or to select the Feature menu,
then press ENTER or
submenu.
3 Press or to select Time Set, then press
ENTER or to access the Time Set Menu.
4 Press or to select Time Set Mode, then
press ENTER or
5 Press or to select the Year, Date, or
Time option, then use ENTER,
set the year, date, and time options.
6 Press EXIT to return to watching the
television.
Note
If the television loses power, the clock setting is
cleared.

Using the sleep timer

The sleep timer lets you select the amount of
time before your television turns itself off
automatically. This setting is cleared when the
television is turned off.
To set the sleep timer:
1 Press MENU.
2 Press or to select the Feature menu,
then press ENTER or
submenu.
14

Viewing closed captions

to access the
Analog broadcasting system captions
to select Manual.
, or to
Digital broadcasting system captions
to access the
www.insignia-products.com
Insignia NS-LCD22 LCD TV
3 Press or to select Sleep Timer, then
press ENTER or to select the amount of
time. To turn off the sleep timer, select OFF.
Note
You can also set the sleep timer by pressing the
SLEEP button on the remote control.
The television decodes and displays the closed
captions that are broadcast with certain
television shows. These captions are usually
subtitles for the hearing impaired or foreign
language translations. All VCRs record the
closed caption signal from television programs,
so home-recorded video tapes also provide
closed captions. Most prerecorded commercial
video tapes provide closed captions as well.
Check for the close caption symbol in your
television schedule and on the tape's packaging.
Note
• The caption feature does not work with
Component, VGA, or HDMI.
• Not all programs and videos offer closed
captioning. Look for the closed caption symbol
to make sure that captions will be shown.
To view closed captions for analog
broadcasts:
• Press the CCD button on the remote control
to select a caption mode. Options include:
• CC1
• CC2
• CC3
• CC4
• TEXT1
• TEXT2
• TEXT3
• TEXT4
• OFF
The closed caption broadcasts can be viewed in
two modes: CAPTION and TEXT. For each
mode, four channels are available.
The CAPTION mode shows subscripts of
dialogues and commentaries of television shows
and news programs while allowing a clear view
of the picture.
The TEXT mode displays various information
over the picture, such as a TV program schedule
or weather forecast, that is independent of the
television show.
To view closed captions for digital
broadcasts:
• Press the CCD button on the remote control
to select a caption mode.
To customize closed captions for digital
broadcasts:
1 Press MENU.
2 Press or to select Feature menu, then
press ENTER or to access the submenu.