Zephyr DLI-E30ASX Manual De Instrucciones página 25

Internal Blower (DBI-600A) - Remote Mounted - Side Outlet
MODEL AK00072
1-7/8-inch x 19-inch
Rectangular Transition
(sold separately)
(Only required to
extend duct along
back of cabinet.)
Electrical Panel
(Can be mounted in
remote location.)
8-inch Round
Wall Cap*
Blower duct routing configuration C
MODEL AK00080
1-7/8-inch x 19-inch
Rectangular Duct
(sold separately)
(Only required to
MODEL AK00070
extend duct along
1-7/8-inch to 8-inch
back of cabinet.)
Round Transition
(sold separately)
MODEL 11030132
5-foot Extension Cable
(sold separately)
(Only required if
electrical panel is mounted
in a remote location - more
than 2-feet away from downdraft.
Use up to 2 extension cables
connected together.)
8-inch Round
Straight Duct*
25
8-inch Round
Elbow*
8-inch Round
Straight Duct*
MODEL DBI-600A
Internal Blower
(sold separately)
(Mounted in
adjacent cabinet)
MODEL DBI-600A
Internal Blower
(sold separately)
(Mounted in
adjacent cabinet)
8-inch Round
Straight Duct*
MODEL ZRC-00LF
Non-Duct Recirculating Kit
with Kickspace Grille
(sold separately)
(Only required for non-duct
applications. "Front" discharge
shown. Kit can also be rotated
for "Left" , "Right" or "Rear" discharge.)
* As required - sourced locally