TrekStor blaxx Manual De Usuario página 11

OPERATING INSTRUCTIONS
Note: Please charge the TrekStor blaxx as described in these operating instructions for at least 3 to 4 hours
before initial use.
1) Controls for the TrekStor
Note: To reset, carefully press the
button is recessed deeply in the housing.
2) Connecting the TrekStor
Note for Windows® 98 users: First install the driver from the accompanying CD before connecting the blaxx to your
PC.
Use the included USB cable to connect the blaxx to a USB port in your PC. Your operating system will
automatically recognize the blaxx and will add a "d
3) Load the TrekStor
The blaxx starts charging as soon as you connect it to a PC. The battery is charged after a maximum of 3 to
4 hours; charging automatically stops to prevent overcharging.
Note: The maximum battery life is reached only after approximately 10 charging cycles.
4) Exchanging data with the TrekStor
Files that are not copy-protected
a) Select the desired files (such as MP3) with the mouse. Copy these files by clicking them with your right
mouse button ("c
opy
b) Under "m c ", select the device with removable storage, "t
y omputer
c) Click it with your right mouse button, and select "p
the data will be available on the blaxx.
blaxx
A) Loop for neck strap
B) TFT display
C) switch (key lock)
t
D) button
B
E) button
O
F) USB/line-in jack
G) button
R
H) Earphone jack
I) button
P
J) button
y
K) button (Play / Pause / On / Off )
9
L) button
D
M) button
Q
button with a pointed object (such as an unbent paperclip). The reset
y
blaxx
blaxx
").
to a PC
r s
eVice With emoVAble torAge
blaxx
s
reK tor blAxx
" to start copying. After copying has been completed,
Aste
– 11 –
" under "m c ".
y omputer
".
EN