TABLE OF CONTENTS
! ............................................................................. 2
®
Before Installation ................................................................................................ 2
Common Tools Needed ...................................................................................... 2
Included Parts ...................................................................................................... 3
Warnings ............................................................................................................... 3
Installation Procedure ....................................................................................... 4-6
Warranty................................................................................................................ 7
Rough-In Dimensions ....................................................................................... 20
Spare Parts..................................................................................................... 21-22
THANKS FOR CHOOSING TOTO!
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.
BEFORE INSTALLATION
„ Observe all local plumbing codes.
„ Make sure the water supply is shut off.
„ Flush all piping thoroughly before installing the valve.
„ Read these instructions carefully to ensure proper installation.
„ TOTO reserves the right to update the product design without notice.
COMMON TOOLS NEEDED
Adjustable
Screwdriver
Thermometer
Wrench
120°
70°
10°
Hacksaw
Hex Wrench
2
INCLUDED PARTS
Check to make sure that all these parts were included in your packaging:
Faceplate & Gasket *
Escutcheon & Gasket
Temperature Limit Stop
Set Screw & Hex Wrench
REQUIRED - NOT INCLUDED
Valve with Plaster Guard
* Actual product may vary in appearance depending on the model.
WARNINGS
For safe operation, please observe the following:
„ Recommended operating pressure:
ƒ
Minimum pressure.........20 psi (0.14 MPA), dynamic
Maximum pressure........80 psi (0.55 MPA), static
ƒ
„ Do not solder connections directly to valve as damage to internal
components may occur.
„ Do not use the product at an ambient temperature below 32°F (0°C).
Control Knob *
Upton Only
Aquia Only
Screw Assortment (4 pieces)
TSST
3