Chicco SKIP Instrucciones De Uso página 17

Ocultar thumbs Ver también para SKIP:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
CLEANING
The cover cannot be removed. Clean all fabric parts with a damp sponge
nd
and neutral detergent. Please refer to the care labels for instructions
on how to clean the fabric parts. Below are the cleaning symbols and
ee
their meanings:
he
Wash by hand in cold water
st
er
Do not bleach
he
Do not tumble dry
fe
se
Do not iron
re
le
Do not dry clean
n-
Periodically wipe clean plastic parts with a soft damp cloth. Always dry
the metal parts to prevent the formation of rust if the stroller has come
he
into contact with water.
MAINTENANCE
a
Lubricate the moving parts only if necessary, with the light application
en
of a silicone based lubricant. Regularly check the condition of the
wheels and, keep them clean of dust and sand. To avoid friction that
may prevent the correct operation of the stroller, ensure that all the
d-
movable plastic parts placed
along the metal frame are clean of dust, dirt or sand. Keep the stroller
To
in a dry place.
to
b-
GENERAL INSTRUCTIONS
HOW TO FIT THE FRONT WHEELS
1. Fit the front wheel by inserting it into the provided pin, until a locking
on
"click" is heard (diag. 1). Repeat for the other wheel.
WARNING: before use, ensure that the wheels are correctly fitted.
ss
n-
HOW TO FIT THE REAR WHEELS
or
2. Fit the rear wheel block by inserting it into the rear leg frame, until
the locking "click" is heard (diag. 2A). To check that it is correctly fixed,
ensure that the metal pin extends from the provided holes (diag. 2B).
n-
Repeat for the other wheel block. WARNING: Ensure that the wheel
block is applied by keeping the brake on the external side.
re
To complete assembly, insert the soft tab located in the centre of the
re
wheel assembly into the provided metal slot (diag. 2C).
als
WARNING: before use, ensure that the wheels are correctly fitted.
HOW TO OPEN THE STROLLER
ts
WARNING: When opening the stroller, ensure that your child, or other
children, are at a safe distance. Ensure that during these operations the
movable parts of the stroller do not come into contact with your child.
er
3. Open the fastening hook (diag. 3A), hold the stroller by the handle
(Fig 3B) and lift to open it (diag. 3C). Push forward until the locking
n.
"click" is heard (diag. 3D).
or
4. Press the locking mechanism downward with the tip of your foot to
open the stroller fully, and lock it in the open position.
WARNING: Ensure that the stroller is locked in the open position, by
n-
checking that the rear locking mechanism is effectively secured.
r-
HOW TO USE THE SAFETY HARNESS
This stroller has a 5-point safety harness that features two shoulder
straps, two adjustment slots, a waist strap and a crotch strap with
be
buckle.
5. Adjust the height of the shoulder straps (Diag. 5A). After sitting the
child in the stroller, fasten the harnesses by fastening the shoulder
straps to the prongs (Diag. 5B) and then insert the prongs into the
crotch strap buckle (Diag. 5C); adjust the length of the harnesses by
n a
making them cling to the child's shoulders and body. To unfasten the
ller
waist strap, press and pull the side prongs (Diag. 5D).
WARNING: To ensure your child's safety, always use the safety harness.
6. For greater safety, the stroller is equipped with D-rings to enable
fastening of an additional BS 6684 standard-compliant safety harness.
The rings are located externally, beside the stroller seat, on both the
right and left side, as shown in diagram 6.
HOW TO ADJUST THE BACKREST
The backrest can be adjusted to an infinite number of positions.
7. To recline the backrest, pull the lever located on the back of the
backrest (Diag. 7A) toward you and at the same time lower the backrest
(Diag. 7B). Release it when it is in the desired position.
8. To raise the backrest, pull the strap upward and release it when the
backrest is in the desired position (Diag. 8).
WARNING: The child's weight can make these operations more
difficult.
REAR BRAKES
The rear wheels are equipped with linked brakes that make it possible to
apply the brake to both rear wheel assemblies at the same time using
only one pedal.
9. To operate the brakes of the stroller, push one of the two levers
located in the centre of the rear wheel assemblies downward, as shown
in diagram 9.
10. To release the brakes, push one of the two levers located in the
centre of the rear wheel assemblies upward, as shown in diagram 10.
WARNING: Always apply the brakes whenever the stroller is stationary.
Never leave the stroller on a sloped surface, with a child on board, even
with the brakes applied.
WARNING: after having activated the brake lever, ensure that the
brakes are correctly applied to both rear wheel assemblies.
FRONT SWIVEL WHEELS
The stroller has front swivel or fixed wheels. It is recommended to
use the wheels in the fixed mode when maneuvering the stroller on
particularly uneven surfaces. The use of the wheels in the swivel mode
is recommended to increase the maneuverability of the stroller on a
normal road surface.
11. To use the front wheels in the swivel mode, push the front lever
downward with your foot, as shown in diagram 11. To use the front
wheels in the fixed mode, align them with the rear ones and raise the
lever.
WARNING: Both wheels must always be locked or unlocked at the same
time.
HOW TO FIT THE HOOD
12. To fasten the hood, hook the plastic clips to the specific positions, as
shown in diagram 12.
WARNING: The hood must be fastened to both sides of the stroller.
Ensure that it is correctly fastened.
13. Open the hood as shown in diagram 13 A and fasten it using the two
side calipers (diag. 13 B). Fasten the Velcro as shown in diagram 13 C .
WARNING: if you wish to close the hood, always unhook the side
calipers first.
CLOSING THE STROLLER
WARNING: When closing the stroller, ensure that your child, or other
children, are kept at a safe distance. Ensure that during these operations
the moveable parts of the stroller do not come into contact with your
child. It is necessary to remove all objects from the shopping basket
before closing the stroller.
14. If open, close the hood by raising the two side calipers (Diag. 14 A)
and pulling the front edge toward you, as shown in diagram 14 B.
15. To close the stroller, press the orange button located in the centre
of the handle (Diag. 15 A) and press the handle forward until it folds, as
shown in diagram 15 B; pull the orange lever located on the right tube of
the frame toward you, pull the rear locking device upward (Diag. 15 C)
and at the same time, push the stroller downward (Diag. 15 D) until the
locking "click" is heard (Diag. 15 E).
16. Once closed, the hook located on the back will automatically lock
the stroller in closed position (Diag. 16 A) to avoid accidental re-opening
and trip open the stand so the stroller will stand upright on its own
(Diag. 16 B).
17

Publicidad

Tabla de contenido
loading

Tabla de contenido