LG Chocolate TOUCH Guia Del Usuario página 147

or hearing health professional may
help you find this rating. Higher
ratings mean that the hearing
device is relatively immune to
interference noise. The hearing aid
and wireless phone rating values are
then added together. A sum of 5 is
considered acceptable for normal
use. A sum of 6 is considered for
best use.
M3 +
T3 +
In the above example, if a hearing
aid meets the M2 level rating and
the wireless phone meets the M3
level rating, the sum of the two
values equal M5. This should
M2 = 5
T2 = 5
provide the hearing aid user with
"normal usage" while using their
hearing aid with the particular
wireless phone. "Normal usage" in
this context is defined as a signal
quality that's acceptable for normal
operation.
The M mark is intended to be
synonymous with the U mark. The T
mark is intended to be synonymous
with the UT mark. The M and T
marks are recommended by the
Alliance for Telecommunications
Industries Solutions (ATIS). The U
and UT marks are referenced in
Section 20.19 of the FCC Rules.
The HAC rating and measurement
procedure are described in the
American National Standards
Institute (ANSI) C63.19 standard.
To enter that the Hearing Aid
Compatibility rating for your phone
is maintained, secondary
transmitters such as Bluetooth and
WLAN(this phone does not have
WLAN) components must be
disabled during a call. See Page 95
for instructions to disable these
components.
145