Equaliser; Network - SOUNDMASTER IR3300 Manual De Instrucciones

It will show connected if the setup is successful. If connecting fails,
IR3300 returns to a previous screen to try again.
Press "Select" to quit the setup wizard.
Several preset EQ modes are available: Normal, Flat, Jazz, Rock, Movie, Classic, Pop News
and My EQ.
In the My EQ settings, you can create your own EQ with custom bass, treble and loudness
settings.

Network wizard
Enter to search AP SSID, then input the WEP / WPA key or choose Push Button/Pin/Skip
WPS to connect to the wireless network.

PBC Wlan setup
Push Button Configuration, it is to connect the AP that supports WPS (Wi-Fi Protected
Setup).

View settings
View the information of current connected network: Active connection, MAC address, Wlan
region, DHCP, SSID, IP address, Subnet mask, Gateway address, Primary DNS and
Secondary DNS.

WLAN region
Select the WLAN region to obtain the optimal WLAN connectivity: Europe or Australia.

Manual settings
Choose wireless network connection and enable or disable DHCP (Dynamic Host
Configuration Protocol).

Network profile
IR3300 remembers the last four wireless networks it has connected to, and automatically
tries to connect to whichever one of them it can find. From here you can see the list of
registered networks. You can delete unwanted networks by turning and pressing then
choosing YES to confirm delete.

EQUALISER

NETWORK

7
IR3300 / English Instruction Manual