Bluetooth; Hands Free Calling; Aux In - SOUNDMASTER IR3300 Manual De Instrucciones

SETTINGS

Scan settings
Choose FM at first, it will go to a specific station playing. Then press "MENU" to get above table.
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio
(hiss) from weak stations. To change the scan settings to stop only at stations with good signal
strength, select "Yes" after choosing Strong station only.

Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-
to-noise ratio (hiss). To play weak stations in mono, select FM weak reception: Listen in mono
only and then YES.
When you select the Bluetooth mode, the device is entering to
pairing and the BT icon at the bottom of the screen will flash.
Turn on your smartphone, tablet or other Bluetooth devices to
search for the device.
The Bluetooth pairing name is "IR3300".
When pairing is successful, the Bluetooth indicator will light up and
stop flashing.
To release BT pairing, turn off or unpair your smartphone, table or
other Bluetooth devices.
Press " " on the Remote Control or the "Select" button on the unit to start or interrupt the
playback. You can press "
to play the previous or next track.
When your Mobile phone is connected with your device by Bluetooth
Bluetooth® mode, you can answer and end the call by pressing the "Select" button. When the
call is coming and you press and hold the "Select" button the call will be rejected.
Connecting DVD player / Set-Top Box / TV outputs to analogue inputs from the sound board.
Use a RCA audio cable to connect the DVD player/TV outputs with the AUX (L/R) input socket
from the sound board.

BLUETOOTH

" or " " on the Remote Control or the „

HANDS FREE CALLING

AUX IN

18
IR3300 / English Instruction Manual
®
/
®
and you are in
" button on the unit