Federal Signal Corporation SST-MV Instrucciones De Instalación página 6

• Never alter the unit in any manner. Safety in hazardous locations may be endangered if additional
openings or alterations are made in units specifically designed for use in these locations.
• The nameplate, which may contain cautionary or other information of importance to
maintenance personnel, should not be obscured if exterior of housings used in hazardous
locations are painted.
Failure to follow all safety precautions and instructions may result in property damage,
serious injury, or death to you or others.
The Federal factory will service your equipment or provide technical assistance with any prob-
lems that cannot be handled locally.
Any units returned to Federal Signal for service, inspection or repair must be accompanied by
a Return Material Authorization. This R.M.A. can be obtained from your local Distributor or
Manufacturer's Representative.
At that time a brief explanation of the service requested, or the nature of the malfunctions,
should be provided.
Address all communications and shipments to:
H. Replacement Parts.
Description
Board Assy, SST-MV
Connector Plug, 4-position
FEDERAL SIGNAL CORPORATION
Electrical Products Division
Service Department
2645 Federal Signal Drive
University Park, IL 60466-3195
Part Number
K2001177D-01
K140340
-4-