Description Of The Controls And Functions - Midland G9 Manual De Instrucciones

DESCRIPTION OF THE CONTROLS AND FUNCTIONS

Display
Your Midland G9 keeps you constantly updated about its operational status through a Liquid Crystal Display
(LCD). The symbols and their corresponding parameters that may appear, according to the operational status of
the device, are described as follows:
0
2
3
4
1. CHANNEL
2. VOX
3.
EMG
4.
5. DW
6.
7.
8. OUT
9. RX
10. TX
11. H(High) / L(Low)
12. CTCSS/DCS
13. CTCSS/DCS tone
14. ROGER
4 5 6
3
2
1
These two large digits indicate the selected channel
VOX function activated
This symbol appears when the keypad lock is activated
Emergency function activated
Dual Watch activated
Indicates the battery status
Vibra-CALL function activated
Indicates if the Automatic Out of Range function looses contact with the other
radios.
Reception mode
Indicates the transmission(PTT pressed);
High or low power selection.
The output power of the big PTT depends on your selection.
Indicate the type of sub audio tone selected.
These three small digits indicate the code of the CTCSS/DCS tones
selected (1-38 / 1-104)
Roger Beep activated.
7 8
11
9
10
12
13
14
13