Safety Tether Key; Console; Key Functions - Bremshey treadline pacer Manual Del Usuario

Improper connection of the equipment-
DANGER!
grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or
serviceman, if you are in doubt as to whether the
product is properly grounded. Do not modify the
plug provided with the product - if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.

SAFETY TETHER KEY

The treadmill cannot be used if the tether key
is not properly installed on the console; if the
key is removed from its place, the treadmill will
immediately stop. Place the safety tether key in its
place on the console. Ensure that the clip of the safety
tether key is properly attached to your clothing; as
the cord tightens, make sure the clip does not detach
itself from your clothing before the safety tether key
disconnects from the console.

CONSOLE

KEY FUNCTIONS

A. SAFETY KEY:
The monitor and the treadmill can be operated only
with the key attached on the SAFETY KEY button
and both of the monitor and the treadmill stop as soon
as the key is removed.
B. MAJOR FUNCTION KEYS:
1. INCLINE +:
Increases the incline level in the range from
a.
0 % to 12 % shown in the Pulse / Incline
4
Bremshey_Pacer09_4_spareparts.indd 4
Safety switch
ON/OFF
Power cord
C. SPEED HOT KEYS:
6 Speed Hot Keys are set as 4, 6, 8, 10, 12, and 14
KPH or set as 2, 3, 4, 5, 6 and 7 MPH. For example,
the speed changes from any speed to 8 KPH by
pressing the Speed Hot Key 8.
D. INCLINE HOT KEYS:
6 Incline Hot Keys are set as 0, 2, 4, 6, 8 and 10 %.
For example, the incline level changes from any level
to 4 % by pressing the Incline Hot Key 4.
E. SPEED QUICK-ACCESS KEYS:
1. + :
2. - :
F. INCLINE QUICK-ACCESS KEYS:
1. + :
2. - :
DISPLAYS AND OPERATING RANGES:
PROGRAM DISPLAY:
Display. Pressing once increases 1 %, speed
up the increment by pressing and holding it
for 2 seconds.
Press this button to choose the program from
b.
P1-P9 and U1-U3.
c. Press this button to set training targets.
2. INCLINE –:
Decreases the incline level in the range from
a.
0 % to 12 % shown in the Pulse / Incline
Display. Pressing once decreases 1 % and
to speed up the decrement by pressing and
holding it for 2 seconds.
Press this button to choose the program from
b.
P1-P9 and U1-U3.
Press this button to set training targets.
c.
Press this button to turn on or turn off
3. POWER:
the power.
Starts or stops the program.
4. START/STOP:
Press this button to select program
5. PROGRAM:
or to scan the function of pulse and incline.
6. ENTER:
a.
program or setting value.
Press this button for 2 seconds to reset all of
b.
the value to initial value.
7. SPEED +:
Increases the speed level in the range from
a.
0.8 to 20.0 KPH (0.5 to 12.5 MPH). Pressing
once increases 0.1KPH (0.1 MPH) and to
speed up the increment by pressing and
holding it for 2 seconds.
Press this button to choose the program from
b.
P1-P9 and U1-U3.
Press this button to set training targets.
c.
8. SPEED –:
Decreases the speed level in the range from
a.
0.8 to 20.0 KPH (0.5 to 12.5 MPH). Pressing
once decreases 0.1 KPH (0.1 MPH) and
to speed up the decrement by pressing and
holding it for 2 seconds.
Press this button to choose the program from
b.
P1-P9 and U1-U3.
Press this button to set training targets.
c.
Same as Speed +.
Same as Speed –.
Same as Incline +.
Same as Incline –.
Shows the information in action.
P1 to P9 and 3 user programs can be chosen with
the SPEED +/- or INCLINE +/- buttons after
pressing the PROGRAM key once.
22.5.2008 12:07:46