Kopp Radio dialer alarm Instrucciones De Manejo página 14

Playing back your own recorded message:
• Press the desired text button T1 ... T4 .
• Your own recorded message will be played back
over the internal speaker 
• The green LED  fl ashes while the text is being
replayed.
If there is no radio contact to the central operating
unit an error will be indicated when attempting to
play back texts T3/T4 .
Storing telephone numbers
• 8 telephone numbers can be stored ( • 8 telephone numbers can be stored ( • 8 telephone numbers can be stored (
pad 1-8)
• "9" and "0" on the number pad are not used for
storing numbers
• A maximum of 16 digits per telephone number.
(Please remember the country code for numbers
abroad.)
Enter the telephone numbers as follows (press each
button individually):
• * (asterisk), # (hash), memory location (digits
1-8), # (hash).
• The red and yellow LEDs  fl ash at different
speeds.
• Enter the desired telephone number .
• Presse # (hash) again to store the number.
• One long tone can be heard as confi rmation.
Only the yellow LED  fl ashes briefl y.
• The yellow LED  goes out.
• The green LED  comes on.
After being programmed the dialer switches to
standby:
• i.e. one long beep can be heard (7)
• the yellow LED (5) fl ashes several times
• the green LED is on permanently
Please note the following when programming tele-
phone numbers:
• Remember to enter the number for an outside
line if you have a PBX (private exchange).
• Inserting a * (asterisk) after the number for the
outside line avoids a delay waiting for the dial
number tone.
Deleting telephone numbers
Press the buttons  in the following sequence:
• Press * (asterisk), 0 (zero), # (hash), memory
location (digits 1-8).
• To confi rm deletion one long single tone  can
be heard and the yellow LED  fl ashes briefl y.
• The yellow LED  goes out.
The green LED  comes on again.
Deleting all stored telephone numbers at once:
Instead of pressing the number for the memory
location, press * (asterisk).
Querying telephone numbers:
Press the following button combination :
• # (hash), memory location (digits 1...8), # (hash)
• The yellow LED (5) fl ashes slowly after the fi rst #
(hash) is pressed.
• Telefon number will be played with internal
spaeker .
14