Remote Control/Battery Replacement; Display/Control Panel - Unold 86525 Instrucciones De Uso

5. In addition, ensure that the appli-
ance is not set up on deep-pile
carpets or in dusty environments.
6. For safety reasons, the appliance
must not be used in the vicinity of
sinks, bathtubs, or water connec-
tions.
7. Never place the appliance directly
under an electrical outlet, and
ensure that the power socket used
is easily accessible at all times.

REMOTE CONTROL/BATTERY REPLACEMENT

1. Carefully pull the cover of the
battery compartment out of the
remote control unit.
2. Insert the battery into the inten-
ded holder.
3. If you want to insert a different
battery, ensure that you use a
CRV2032 button cell battery.
4. Carefully slide the cover back into
the remote control unit.

DISPLAY/CONTROL PANEL

Control panel:
a Button - High/Low (heating capacity)
b Button - Temperature/Time
c Button - Oscillation/Swing function
d Button - Adjustment
e ON/OFF button
f Button + Temperature/Time
22
8. Check whether the power cord is
routed in such a manner that no
one can stumble over it.
9. The power cord should not touch
any housing parts, this could
cause the cable to melt.
Be aware that the appliance
can become very hot - fire ha-
zard! Particularly ensure that
children are kept away from the
appliance.
5. If you adjust the appliance with
the remote control unit, ensure
that you hold it in the direction
of the fan heater while you are
making the settings.
6. The designations of the buttons
on the remote control unit are
identical to those of the buttons
on the appliance. Please com-
ply with the instructions in this
regard in the chapter, "Preparing
the appliance for operation".
f
e
a
b
c
d