Cleaning And Care - Unold 86525 Instrucciones De Uso

Selecting the temperature
19. Now you can select the desired
heating temperature. Press the
button twice.
20. The pre-set value of 25°C appears
in the display. Use the "+" and
"-" buttons to select the desired
temperature in a range between
15°C und 35°C.
21. The selected
shown in the display.
22. Confirm the selected temperature
by pressing the " button again.
23. The appliance shows the current
room temperature,
temperature will be maintained
automatically.
24. When you touch the "
the information in the display
will flash for 5 seconds. If you
make no input within these 5
seconds, the display will show the

CLEANING AND CARE

Switch off the appliance.
Unplug the plug from the
electrical outlet.
Allow the appliance to cool
completely.
24
temperature is
the set
button,
current room temperature. If the
room temperature is below -9°C,
"LO" is shown in the display, if
the temperature is above +39°C,
the display
temperatures between -9°C and +
39°C the actual room temperature
is displayed.
25. To switch off the appliance, press
the ON/OFF button and switch
the main switch on the rear of the
appliance to "0".
Be aware that the appliance
can become very hot – danger
of burns! Particularly ensure
that children are kept away
from the appliance.
1. Never use any abrasive scouring
agents, steel
objects, hot cleaning agents or
disinfectants.
2. To clean the filter, open the filter
cover. Remove the filter and clean
it with warm water that must not
be hotter than 30°C.
3. Allow the filter to dry completely,
before you reinsert it. Then
carefully close the filter cover.
4. You can remove dust in the
appliance if you carefully hold a
vacuum cleaner against the air
outlet grille or air inlet grille.
5. 8. Store the fan heater in a dry,
safe place so that it is protected
from dust, shocks, heat and
moisture.
shows "HI".
wool, metal
At