Basic Operation - Cyber Power Professional Rackmount Serie Manual De Usuario

BASIC OPERATION

1. Multifunction LCD Readout: An LCD that shows various UPS information using icons and messages.
2. Power On Indicator: Indicates that the AC utility input power's condition is normal and that the UPS outlets are
providing power, free of surges and spikes.
3. Power Switch: Master on/off switch for equipment connected to the UPS.
4. LCD Readout Toggle Button: Used to select among a variety of information the LCD can display.
5. Battery Backup and Surge Protected Outlets: The unit provides a total of six outlets with battery backup and surge
protection. They ensure that connected equipment will keep an uninterrupted operation over a period of time,
during a power failure.
Critical /Non-critical: It is possible to program the unit in a way so that the outlet block marked as "non-Critical", (4
ports), will stop the provision of power to connected equipment after a certain period of time, thus making more
runtime available for the equipment connected on the outlets marked as "Critical", (2 ports). In other words, the
user can establish runtime priority for certain connected equipment, maximizing its "availability" during a prolonged
power outage. This type of control takes place with the use of the provided PowerPanel® Business Edition S/W.
6. AC Inlet: Connect the AC Power cord to a properly wired and grounded outlet.
7. Input Circuit Breaker: This circuit breaker serves to provide input overload and fault protection.
8. USB port to PC: This is a connectivity port allowing communication and control among the UPS and the connected
computer. You should install on your computer the PowerPanel® Business Edition software appropriate to the
operating system you are using.
9. Serial Port: This is a connectivity port allowing communication and control among the UPS and the connected
computer. You should install on your computer the PowerPanel® Business Edition software appropriate to the
operating system you are using.
10. SNMP/HTTP Network slot: Remove the cover panel to install an optional SNMP, allowing your UPS be controlled
and monitored via a network connection.
11. EPO (Emergency Power Off) port: Allow for an emergency UPS Power-Off from a remote location.
12. Ground Stud: Use the Ground Stud to ground the UPS.
4