Sapphire PC-AM2RD790 Manual De Instrucciones página 17

CD-in Connector
The CD-in connector is used to receive audio from a CD-ROM
drive, TV tuner or MPEG card.
Front Audio Connector
The front audio connector is used to connect to the line-out and
mic-in jacks that are at the front panel of your system.
Optical S/PDIF Connector
The optical S/PDIF connector is used to connect an external audio
output device using an optical S/PDIF cable.
Important:
DO NOT use optical S/PDIF and coaxial RCA S/PDIF at the
same time.
Installing the Bernstein Audio Module
1. The Bernstein audio
module connects to the
system board by means
of the provided audio
cable.
2. Inser t one end of the
cable to the Bernstein
audio connector on the
system board and the
other end to the corre-
sponding connector on
the audio module.
11 1
12 2
Bernstein audio
module connector
E
English
17