Installation Manual
PPT8/12/16/22LX/LY SLIMLINE
1.0 Introduction
Calorex Heat Pumps Ltd. · The Causeway, Maldon, Essex CM9 4XD, UK
The Calorex 'Propac' range of air to water heat pumps is designed for
swimming pool heating and consists of 4 models. Heat pumps in this
manual are designed to heat pool water and spas within the range of 10°C
to 40°C. Standard units (designated X) are suitable for outdoor pools
operating in ambient temperatures above 5ºC.(Reverse cycle defrost
models (designated Y) operate in ambient temperatures down to
-15ºC).The water heat exchanger is a full flow type, manufactured from
titanium tube, which is a highly corrosion resistant material. The heat
pumps are suitable for use in fresh water and salt water pools. PPT8/12
heat pumps are fitted with rotary compressors and PPT16/22 heat pumps
are fitted with scroll compressors. Both types of compressor are known
for quiet running. A 6 minute compressor start delay timer is incorporated
for compressor protection. With these features the heat pump is designed
to have a long, trouble free life.
All units have integral safety devices to protect the heat pump from internal
and external faults. Indicator lamps indicate operating mode. An adjustable
digital thermostat controls water temperature.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
Calorex Heat Pumps Limited is an ISO9001:2000 certified company.
All Calorex heat pumps are CE approved
Page 4
IMPORTANT
®
SD638150 ISSUE 11