Cleaning And Maintenance Of The Oven's Front Door Glass; Changing The Oven Lamp - Proxy COC54EB-WP Guia Del Usuario

CLEANING AND MAINTENANCE OF THE OVEN'S FRONT DOOR GLASS

Remove the profile by pressing the plastic latches on both left and right
sides as shown in Figure 8 and pulling the profile towards yourself as
shown in Figure 9. Then remove the inner-glass as shown in Figure 10.
If required, middle glass can be removed in the same way. After cleaning
and maintenance are done, remount the glasses and the profile in reverse
order. Make sure the profile is properly seated in its place.
Figure 8

CHANGING THE OVEN LAMP

In order to avoid the possibility of an electric shock, ensure that the
circuit of the appliance is open before changing the lamp.
(The open-circuit is an electrical circuit that does not conduct current.)
1- First of all, cut the electrical connection of the appliance and ensure
that the appliance is cooled down.
2- Remove the glass protection by turning as
shown in the figure. If you have difficulty in
turning it, the use of plastic gloves will help you.
3- Afterwards, remove the lamp by
turning and install the new lamp with the same
specifications. The specifications of the lamp
should be as follows:
- 230 V, AC
- 15 W
- Type E14
4- Place the glass protection and complete
the replacing process by plugging in the electric
cable of the appliance. Now, you can use your oven.
GB
Figure 9
18
2
1
Figure 10
Figure 11
Figure 12