Glacier bay 65828-1001 Guía De Instalación Y Cuidado página 20

Installation (continued)
4
Installing the weight
□
Install the weight clip (I) at the point of the
hose marking "weight here".
□
Insert the weight (H) onto the clip (I) by sliding
it down onto the clip (I).
H
H
I
G
5
Making the water supply
connections
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
□
Thread the connector (J) onto the hose (1).
□
Thread the connector (J) on the supply line onto
the outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
1
J
2
20