Looking After And Cleaning Your Machine; A) Looking After Your Machine - Brandt PLA1322N Manual De Instrucciones

4) LOOKING AFTER AND CLEANING YOUR MACHINE

a) Looking after your Machine
Before cleaning the machine unplug the lead from the wall socket and then disconnect the
machine's thermostat unit.
 Cleaning the plate
The machine cannot be washed in the dishwasher.
Clean the plate using a soft, non-abrasive sponge with washing-up liquid or cleaning cream.
Dry with kitchen towel and make sure the electric unit is dried properly.
Note: Do not use metal scourers or abrasive detergents because they may damage the non-
stick surface.
Tips: To facilitate cleaning you can place a little rock salt on the non-stick surface and rub
lightly with a damp sponge to remove burnt-on fat. Rinse with clean water and wipe dry.
 Cleaning the fat collection tray
Clean it with warm water and washing-up liquid. It can also be washed in the dishwasher.
 Cleaning the thermostat unit and the power lead.
Do not immerse in water or any other liquid.
You can clean them by wiping with a slightly damp sponge or cloth.
BRANDT FRANCE - Simplified Joint Stock Company with capital of 1,000,000 Euros
89/91 Boulevard Franklin Roosevelt - 92854 Rueil-Malmaison (France)
17