GI.BI.DI. Ground Serie Instrucciones De Instalación página 24

24
I U K
MAINTENANCE
Periodically check the gate paying particular attention to
• Check the hinge pivots;
• Check good functioning of the safety devices;
• Unlock the operator and check that there are no points of friction along the entire travel of the gate;
• Check that there is no dirt or deposits on the transmission levers.
Periodically check proper adjustment of the electronic anti-crushing safety device and the efficiency of the unlocking
device for manual operation (see the relevant paragraph).
The safety devices installed on the system must be checked every six months. Gi.Bi.Di. Srl reserves the right to
change the technical data without prior notice in relation to product development.
MALFUNCTIONING
For any unresolved malfunction, cut the power to the system and call in a qualified technician (installer
In the period when the gate is out of service, activate the manual unlocking device to allow manual opening and
closing.
:
GROUND
).