Lighting; Handling/Transport - OP CF 1 Manual De Uso

OP S.r.l.
25131 BRESCIA - Via Serpente, 97 - Tel. 030/3580401 - Fax 030/3580838
_________________________________________________________________________
•
Filtering components: these are the two filters installed on the delivery and suction
lines. Their filtering levels are different, with filters of 90
standard, although cartridges with different filtering levels can be supplied on
request.
•
Safety systems providing protection against the risks deriving from use of the
machine. Consisting of a switch with protection against overload and short-circuits,
they also include a release coil which prevents the motor from starting if the
electricity supply fails and is suddenly restored (i.e. the motor can only be started by
intentionally pressing the start button).
TECHNICAL/DIMENSIONAL
Power
Drive
Electric motor
Overall dimensions ( Lx D x H)
Weight
Maximum pump delivery rate
Noise level

LIGHTING

The equipment does not have its own lighting and so it must be used in suitably
illuminated areas. If perfect visibility is not possible in the working area, use of the
equipment must not be authorized.

HANDLING/TRANSPORT

The machine can easily be transported without any disassembly operation. Nevertheless
it is important to proceed as follows :
•
If the trolley has to be moved, hoist it from under the tank using a lift truck. During
the handling be careful not to unbalance the trolley, it could overturn.
•
Avoid knocks or sudden shaking during lifting or positioning.
•
During transport, take care not to damage the hydraulic drive components positioned
on the outside of the machine.
•
If the machine has to be shipped, make sure that it is securely fixed to the means of
transport and protected against knocks and vibrations.
DATA
35
µ
and 30
VALUES
0,55 Kw
electrical
4 poles, type B5
750 x 440 x 950
mm
60 Kg Kg
39 lt/min
78.8 dB
µ
fitted as
E
N
G
L
I
S
H