Deinstalling Remote Controls (Senders) - Huwil Huwilift E-Verso Manual De Instrucciones

7.

Deinstalling remote controls (senders)

To deinstall a remote control from its control unit, please proceed as follows:
7.1 Ensure that the device is properly installed and that it is connected to the
power supply.
7.2. Move the flap about 10 cm by hand.
This actuates the learning mode in the control unit. Within a period of 3 seconds
the remote controls can be deinstalled.
7.3 Keep the button of the remote control pressed for at least 15 seconds.
The flap of the cabinet will actuate normally and attain its final position.
After 15 seconds the flap of the cabinet confirms the deinstallation of the remote
control with an open-close movement.
7.4 Make sure that this remote control does not initiate a movement of the cabinet
flap anymore.
28
3
seconds
15
seconds
seconds
© HUWIL 02/2009 Huwilift E-Verso / E-Strato / E-Senso/ E-Senso+
15